What is the process of mixing concrete?

Procedure of Hand Mixing of Concrete Measured quantity of sand is spread evenly. The required quantity of cement is dumped on the sand and spread evenly. The sand and cement is then mixed intimately with spade, turning the mixture over and over again until it is of even color throughout and free from streaks.

What is a truck mixer?

Definition of truck mixer : a concrete mixer mounted on the chassis of a truck used for mixing and delivering concrete.

How many m3 are in a concrete truck?

6 Wheeler Trucks

What are the two methods of mixing concrete?

There are two main types of mixers: batch and continuous. In each type there are several configurations. The efficiency of a mixer is determined by the homogeneity of the concrete produced.

What are the precautions need to be considered for mixing of concrete?

Mixed materials must be laid at the required site within 30 minutes after adding water to the cement. Care should be taken that in any case the mixed materials should not be dropped from a height greater than 1.2 meter in order to prevent segregation of coarse aggregate and mortar.

How much concrete fits in a mixer truck?

Concrete trucks weigh an average of 25,000 lbs. by themselves and up to 40,000 lbs. when carrying a full load. Their capacity is around 8 cubic yards, but can be up to 10 cubic yards if fully-loaded.

What is the capacity of concrete mixer?

Automatic Concrete Mixer Machine, Capacity: 250 Liters