Is a neutral required in a switch box?

Neutrals. When wiring lighting circuits supplied by a grounded general-purpose branch circuit, the 2011 NEC now requires you to provide a neutral conductor at nearly every switch point [404.2(C)]. The purpose for this is to complete a circuit path for electronic lighting control devices, such as occupancy sensors.

Why is there no neutral on switches?

** Normally neutral is omitted entirely from a switch loop. The new smart switches do need neutral. Because of this, there has been a change in the Electrical Code. Nothing changes in the conduit wiring method, because it’s fairly easy to add a neutral wire.

Does a standard light switch have a neutral wire?

Standard rocker and toggle switches will not have a neutral wire connected. If you do find a white wire connected to a rocker or toggle switch, it is likely not a neutral wire. You can check out our support article on common switches to help identify which wire this will be.

How do you hook up a light switch without neutral?

Option 1 – Run a Neutral Wire If you want to use smart switches and don’t have a neutral wire in your switch box, you can hire an electrician to run a neutral wire between the light fixture and the switch. You can also have an electrician rewire the switch and light fixture, which is potentially more expensive.

Why is a neutral wire needed?

Neutral wire carries the circuit back to the original power source. More specifically, neutral wire brings the circuit to a ground or busbar usually connected at the electrical panel. This gives currents circulation through your electrical system, which allows electricity to be fully utilized.

Is the common wire live or neutral?

The common wire is normally the white wire, at least in the United States, and is often called the neutral wire. It’s also called common because all circuits in the house typically have the white wires tied together, which means every circuit has that wire in common.