How much does it cost to fix a torque converter?

Most auto repair shops will charge someone anywhere from $600 to $1000 for a torque converter replacement job. If you would rather do the replacement job yourself, then a new torque converter will cost anywhere from $150 to $500.

Can you drive with a bad torque converter clutch?

The quick answer is that a car with a bad shift solenoid can typically be driven. Although it may not shift beyond a certain gear, you should be able to drive it for a short time without inflicting any severe harm.

Can a bad torque converter ruin a transmission?

A bad torque converter can damage a transmission. Bad torque convertors can lead to damage, overheating, friction, and transmission fluid degradation. If these problems continue, it can cause even more damage to transmission.

What happens if you keep driving with a bad torque converter?

When the torque converter starts malfunctioning, you may feel shuddering and even slipping in overdrive. You usually notice your car shuddering because it feels like it’s vibrating. Your car will vibrate even when you’re not going very fast. The shuddering makes the car lag and is very noticeable.

What are the signs of a bad torque converter?

Audible Clues. Your torque converter can make a variety of noises when it goes bad. You may first notice a whine,…

Slippage and Weak Acceleration. As the output pressure from the torque converter drops, the transmission will be starved…

Shifting Symptoms. Another symptom of lowered pressure output from the converter is a…

How to replace a torque converter?

Park you car on a flat,clean surface.

Jack one end of the vehicle off the ground and support the weight onto two automotive jack stands.

Go under the vehicle to the end of the drive shaft that connects it to the rear axle.

Place the vehicle in neutral so that the drive shaft can be turned.

What stall converter to buy?

Many street performance cars will be running normal performance cam which should have a stall converter of 2800 to 3000 RPM.For the hotter cars that have bigger cams, then a 3500 RPM converter is better. If the car has a 350HP engine, then a 2400 RPM stall is best.

How to test a torque converter?

Take the following precautions Check with your car or transmission manufacturer to make sure it’s safe to run the test.

Prepare your car Before testing your torque converter,make sure all your fluids are in good condition. Also,chock your wheels and set the parking brake.

Start your engine Press the brake pedal all the way to the floor and start your engine. Shift your transmission into drive. Don’t let go of the brake.

Put the pedal to the metal While pressing on the brake pedal,press the accelerator to the floor for two to three seconds.

Interpreting the stall-speed test result If the RPM reading is lower than the specifications for your particular torque converter and engine,it means the torque converter is failing and needs