What is a Magnaflux test?

A magna flux test is a non-destructive testing (NDT) process for detecting surface, and subsurface, discontinuities in materials such as: iron, nickel, cobalt, and some of their alloys.

What is Magnaflux used for?

Magnetic particle (Magnaflux Inspection) inspection is a method for detecting cracks, laps, seams, voids, pits, subsurface holes, and other surface, or slightly subsurface, discontinuities in ferro-magnetic materials. Magnetic particle inspection can be used only on ferro-magnetic materials (iron and steel).

What does it mean to Magnaflux an engine?

Magnafluxing involves using fluorescent iron oxide particles, and a strong magnetic field to locate cracks, seems, dents, or leaks on iron and iron-based alloy metals that would otherwise be impossible to see with the naked eye.

What is the process of Magnaflux?

Electric Current passing through a wire wound into a coil creates a magnetic field lengthwise inside the coil. 2. When a part is placed in a Magnaflux® Unit inside a coil carrying electric current, a magnetic field running lengthwise of the part is created. This is Longitudinal Magnetization.

How much does Magnaflux cost?

The hot tank, pressure testing, and the Magnaflux test cost about $105 to $130. If the mains need to be align-honed (bored), add $180.

What is the purpose of magnetic particle inspection?

Magnetic Particle Inspection (MPI) is a non-destructive testing method that can detect surface and subsurface flaws in ferromagnetic materials. Magnetic particle inspection is often carried out to help determine an item’s fitness for use or conformity.

How much does it cost to Magnaflux a block?

The hot tank, pressure testing, and the Magnaflux test cost about $105 to $130. If the mains need to be align-honed (bored), add $180. Decking the block runs about $180.

How much is a block of Magnaflux?

What is Magnaflux crankshaft?

The Magnaflux process utilizes an electrical current to produce magnetism in the part being checked, a solution containing iron powder is flowed over the part. The components having been magnetized will draw the iron powder to the void area “crack” . Utilizing the ultraviolet black light clearly shows the flow “crack”.

What is the minimum lifting capability of DC yokes?

Yoke Calibration: Ac Yoke shall lift weight of al least 10 lbs (4.5 kg) at the maximum pole spacing that will be used. and for the DC yoke shall lift weight of at least 40 lbs (18 kg) at the maximum pole spacing that will be used.