Why is there no FAT32 format option?

It is usually due to that your partition is larger than 32GB. Because the default Windows format option only allows the FAT32 partition on drives that are 32GB or less. In other words, Windows built in formatting methods like Disk Management, File Explorer or DiskPart won’t allow you to format 64GB SD card to FAT32.

Why can’t I change USB to FAT32?

Why can’t you format 128GB USB flash drive to FAT32 in Windows. The reason is that by default, the Windows File Explorer, Diskpart, and Disk Management will format USB flash drives below 32GB as FAT32 and USB flash drives that are above 32GB as exFAT or NTFS.

How do I force FAT32 to format?

How to Format a USB Drive in FAT32 on Windows 10 Using File Explorer

1. Click the Start Menu.
2. Click This PC.
3. Right-click the USB Drive.
4. Click Format.
5. Click Start. If the File system isn’t listed as FAT32, click on the drop-down menu and choose it.
6. Click OK.
7. Wait for the drive to format then click OK to finish the process.

How can I format my hard drive to FAT32?

Select your hard drive in the drives list, right-click on it, and select Format. Set the options as the following and then hit OK. Partition label – enter a name for your drive. File system – select FAT32.

Can I format an external hard drive to FAT32?

Use FAT32Format To Format Your External Hard Drives The FAT32Format utility has been around for a long time and it lets you quickly format any of your external hard drives to FAT32.

How do I format my external hard drive to FAT32 on Windows 10?

Follow the 3-step guide here to format to FAT32:

1. In Windows 10, go to This PC > Manage > Disk Management.
2. Locate and right-click on your USB flash drive or external hard drive, select “Format”.
3. Set the USB file system to FAT32, tick “Perform a quick format” and click “OK” to confirm.

How do I format NTFS to FAT32 on Mac?

Into your Mac, plug in the USB drive. Next, select Applications>Utilities and then launch Disk UtilityFrom the disk utility sidebar, select the USB drive. From the disk utility toolbar, chose Erase. Give the formatted disk a name and select either MS-DOS (FAT32) or ExFat from the format menu.