What should I do if I forget the NVR password?

Method: Simply input the local IP address of your NVR, then click “Reset”. The reset will take more than 20 seconds to complete, then you need to manually reboot the NVR. The username and password will reset to default (user: admin; password: blank/empty).

How do I reset my NVR to factory settings?

To factory reset the device, hold the reset button down and unplug the NVR from power. Once power is removed from the unit, continue holding the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the power supply back into the unit. You should hear a beep if not that is alright.

How do I change my NVR password?

Steps to change default password on Hikvision DVR/NVR

1. Go to Main Menu >> Configuration >> User.
2. Select the desired user and click ‘Edit’ icon.
3. Input the old password.
4. Check change password box.
5. Input the new password (complex password is highly recommended)
6. Confirm the new password.

How do I reset my Hikvision NVR password?

1. On device. 1) Click Forget Password on login menu. 2) Choose Verify by Hik-Connect. 3) Into the following page：
2. On app. 1) Run Hik-Connect app. 2) Tap More – Reset Device Password.
3. On device. 1) Enter the verification code obtained from app in the box below. 2) Click OK, then the system allows to create new password.

What is NVR password?

What are the default passwords for my DVR or NVR? The default passwords for your DVR or NVR are the same as the username. Therefore, the default password for the 888888 User is 888888, the default password for the admin User is admin and the default password for the 666666 User is 666666.

What is ZOSI admin password?

In the DVR login screen input the username admin and the Super Password that was created by the SPD App and press the login button. Next time you reboot the DVR, the username will be admin with blank password. (no password, just hit the login button).

How do I reset my IP camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

What is the Hikvision NVR default password?

12345
Hikvision default password

User Name	Password
admin	12345