How do I find my NVR IP address?
How do I find my NVR IP address?
Find the IP address and Web port # of your NVR (IP address can be found in System Setup > Network Setup).
How do I log into NVR?
Open up an Internet browser and type in the IP address of the NVR. Log in using username and password of the recorder. Go to Configuration > Network > Advanced Settings > Other. Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into.
How do I connect to NVR online?
Step by Step Instructions
- Connect the NVR and IP Camera directly to your router or modem with a CAT5 cable.
- Open the ConfigTool and locate your NVR and IP Camera.
- Login to both using Internet Explorer.
- On the NVR, go to Settings->Network->WiFi Device Manage.
- On the IP Camera, go to Setup->Network->WiFi.
How do I set up NVR?
Hardware Setup
- Connect an Ethernet cable from your router to the back of your NVR.
- Connect an Ethernet cable from one of the PoE ports on your NVR to your camera.
- Connect a VGA or HDMI cable from the back panel of your NVR to a monitor or TV.
- Connect the included mouse to a USB port on the front or back of your NVR.
How do I find out my cameras IP address?
Firstly go to the My Camera page in the app, tap the arrow to the right of the camera and then select the “Edit camera” symbol. You will then be taken to the Edit Camera screen, from here tap Advanced Settings, then on the Advanced Settings page tap About device. The cameras IP address will be shown under “local”.
Does NVR assign IP address?
In order for your DVR/NVR to communicate with the IP cameras you need to put the DVR/NVR on the same network as the cameras. They need to share the same IP address scheme. Depending on the IP address of your router, usually it is 192.168. 1.
How do I connect my NVR to my computer?
Plug one end of the included HDMI cable into the HDMI port on the back of the NVR. Plug the other end of the HDMI cable into the back of your TV or monitor. NOTE: To view cameras, TV/Monitor must be tuned to the same Input the HDMI is plugged into. Plug the USB mouse into the USB port on the back of the NVR.