What is the first action required of a boat operator who witnesses a boating accident?

An operator involved in a boating accident must: Stop his or her vessel immediately at the scene of the accident and… Assist anyone injured or in danger from the accident, unless doing so would seriously endanger his or her own vessel or passengers and…

What is the first action required of a boat operator who witnesses a boating accident quizlet?

What is the first action required of a boat operator who witnesses a boating accident? To provide assistance.

What should a vessel operator do to make sure everyone knows what to do in case of emergency?

What should a vessel operator do to make sure everyone knows what to do in case of an emergency? Conduct an emergency drill with the passengers.

When tow vessels are operating in the same area who is responsible for avoiding a collision?

The answer to who is responsible for avoiding a collision between two boats is that both captains share this duty. It doesn’t matter if you’re boating inland or international waters.

What should the operators of a PWC and a motorboat do when approaching head on?

PWC Encountering PWC

• Meeting Head-On: Neither vessel is the stand-on vessel. Both vessels should turn to starboard (the right).
• Paths That Cross: The vessel on the operator’s port (left) side is the give-way vessel.
• Overtaking: The vessel that is overtaking another vessel is the give-way vessel.

What should you do before fueling your boat?

Shut off all fuel valves and extinguish all open flames, such as galley stoves and pilot lights. Close all windows, ports, doors, and other openings to prevent fumes from entering the boat. Remove portable fuel tanks from the boat and fill them on the dock. Make sure that your fire extinguisher is within reach.

Which safety points should the boat operator inform persons on board about?

Before departing, have a safety discussion with everyone on board. Some of the things you should point out are: Locations of safety equipment—lifejackets and PFDs, manual propelling device, anchor, fire extinguisher(s), visual signals, first-aid kit, and bailers/water pump.

What is the most important to explain to your passengers if you are the boat operator?

You should explain and/or demonstrate the following during loading of passengers and gear: Always have one hand for the boat and the other for yourself. Keep the weight of everything (passengers and equipment) as low in the boat as possible. Check the boat’s capacity plate.

What action should be taken when a motorboat is crossing paths with a PWC?

The motorboat should slow down and let the PWC pass because the PWC is smaller. The PWC should speed up and attempt to cross in front of the motorboat. The vessel on the port (left) should give way. The slower-moving vessel should give way.

What should the operators of a PWC and a motorboat do when approaching head-on quizlet?

A motorboat and a PWC are approaching head-on. What action should be taken? Both vessels should turn to starboard (right). Both should maintain course until the last moment.

What is an important step in the fueling process of a boat?

Proper Fueling Procedures

1. Secure boat to the dock.
2. Switch off engine.
3. Extinguish all open flames.
4. Do not use electrical switches.
5. No smoking.
6. Ports, hatches, and doors closed.
7. Make certain all passengers are ashore.
8. Determine quantity of fuel required and make sure it is the proper type of fuel.