How much does it cost to fix P0012?

If this is the case, prepare to spend anywhere from $150 to $300 in parts and labor. The cost might also include replacing the timing belt and tensioner.

How serious is P0012 code?

How Serious Is Code P0012? – Severe. This trouble code severely impacts the drivability of your vehicle. The most common problems consist of increased engine stalling, rough engine idle, lowered fuel economy, and rattling/knocking noises from the engine.

Can I drive with P0012?

We do not recommend driving your vehicle with a P0012 trouble code. Fuel economy will be diminished, as well as your engine may show signs of hesitation and/or lack of power. The check engine light or malfunction indicator lamp illuminated while P0012 is recorded in the ECM.

Can low oil cause P0012?

Sludge buildup can cause a P0012 trouble code Sludge is caused by running the engine at low oil levels, neglecting oil changes or going too far on an oil change, poor PCV operation or using a poor quality oil. Change the oil, clear the code and drive the vehicle.

What is a camshaft position timing over-Retarded Bank 1?

Diagnostic trouble code (DTC) P0012 stands for “Intake (A) Camshaft Position Timing – Over-Retarded (Bank 1).” The code indicates that your car’s computer has detected a difference in the desired camshaft position angle and the actual camshaft position angle.

What does engine code P0011 mean?

What Does Code P0011 Mean? The variable valve timing system increases fuel economy and engine performance by regulating when the intake and exhaust valves are opened and closed. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be.

What causes camshaft timing problems?

Circuit issues (e.g., damaged wiring, loose connections) Damaged timing components (e.g., a stretched timing chain or broken guide) Low engine oil level. Oil contamination or buildup causing the VVT oil flow control valve to stick.

How do I fix code P0012?

What repairs can fix the P0012 code?

1. Resetting the fault codes and performing a road test.
2. Changing the oil and filter to the proper oil viscosity for the engine’s specifications.
3. Repairing or replacing the wiring or connection to the camshaft oil control solenoid.

What is engine code P0345?

What Does P0345 Mean? The camshaft position sensor located in the internal combustion engine monitors the position and rotational speed of the camshaft. When the trouble code P0345 is set, the ignition spark and fuel injector timing fail due to the engine not knowing when to fire these components.