How do you sand a pine floor?
How do you sand a pine floor?
Sand the floor with a medium grit (40 or 50 grit) with the grain. Even though the paper will load up, continue to sand — while changing the paper frequently. After the medium sanding is done, you will need to sand the edges. Using an edger with coarse-grit paper (36 grit), sand all edges smooth and flat.
Can pine floors be refinished?
Most pine flooring (and pine steps) can be sanded and refinished. Refinishing pine floors is more challenging than sanding oak floors as the wood is softer. This is definitely a job best left to the professionals. There are multiple species with varying hardnesses, each requiring different grits.
Can you sand wood floors with a hand sander?
The palm sander is definitely the most common tool for sanding a wooden floor by hand. Use it with a coarser sandpaper grit for a lot of efficiency and quick results. Palm sanders also have a square edge, which means you can sand right into the corners of the floor.
What is the best sander for pine floors?
For sanding floors, only a handheld belt sander will work. For sanding pine floors, however, belt sanders are not the best choice because they sand too aggressively for soft wood. If your pine floor is very old, a belt sander could easily destroy it with gashes and gouges.
How do you finish a pine floor?
You’ll need to finish your own pine flooring using stain, varnish, or oil. For maximum protection and durability, give the floor 2 coats of stain or varnish and wait 24 hours for the floor to dry. Then apply a final coat of stain, varnish, or oil.
How much does it cost to refinish pine floors?
The cost to refinish pine flooring ranges from $4 to $7 per square foot. Since pine is a softer wood that dents and scratches more easily, the contractor needs to be careful with the sanding process and vary the grit depending on the condition of the floor, which means a slightly higher price.
How do you refinish pine wood?
Creating a Smooth Sanded Surface
- Sand the entire exposed surface of the piece with an 80-grit sandpaper.
- Brush away the dust and debris.
- Repeat the sanding steps using a 120- or 180-grit sandpaper.
- Repeat the sanding steps using a 220-grit sandpaper.
- Brush and vacuum away all debris and dust.
How do you fix pine floors?
Apply a thin coat of polyurethane over your pine floor, brushing in the direction of the grain. Allow to dry for 2 hours and then sand with 220-grit sandpaper. This gives the next coat something to adhere to with the surface. Vacuum the dust and wipe with a tack cloth.
What kind of sander do you use for wood floors?
The drum sander is the real workhorse of hardwood floor sanding. It is a massive piece of equipment, too heavy for most people to lift—two people are required to carry it.