Can you spot varnish hardwood floors?

Hardwood floors coated with polyurethane finishes are sturdy, but they are not capable of resisting every type of scrape or stain that comes their way. Before you rent a floor sander and strip all the finish off the floor to refinish it, try a few simple remedies to spot repair the hardwood floor.

Can wood floors be refinished in sections?

If your wood floors continue into other rooms of the home, you cannot sand, stain and refinish the one area. The only way to refinish one room is to install a transition piece (or if there’s one in place already).

Can I varnish over old varnish floor?

Varnishing a wooden floor. It is possible to re-varnish a previously varnished floor which is in good condition (see here), however if the previous varnish has started to wear in some areas, is cracking or flaking the only real option is to remove the original varnish and start again.

What finish is best for hardwood floors?

Polyurethane
What is the Best Finish for Hardwood Floors? Polyurethane is the most popular finish for floors. It’s tough enough to handle constant traffic and is resistant to almost everything. There are two types of polyurethane finish: oil-based (solvent borne) and water-based (waterborne).

Can I stain my floor in sections?

Because when a hardwood floor starts to show wear and tear, you can refinish it and in so doing, revitalize its look and performance. Apply stain to the hardwood floor in one 2-foot section at a time using a lambswool applicator. Top the finish with a protective and glossy coat of polyurethane sealer.

How do you refinish a floor without sanding it?

The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.

Can you polyurethane over old polyurethane?

As long as you use the proper steps to prepare the finish, you can put polyurethane over old polyurethane. But before you apply the topcoat polyurethane, you might have to first sand the surface lightly using a dull 120 to 150 grit abrasive screen using a heavy floor buffer.

Can I varnish my floor without sanding?

You can use damp rug and mop cleaner. Remember the varnishing detergent must be applied on clean surface only. You must take the top layer of the old varnish off. For this procedure we recommend to use drywall sanding screen (number 20 will do great).

Can you varnish wood floors without sanding?

Luckily, you have options other than leaving the floor as it is or replacing it. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.

How do I bring my old hardwood floors back to life?

How to Revitalize Floors

1. First, give your floor a good cleaning.
2. Next, apply the revitalizer according to the package instructions.
3. Use your mop to spread the revitalizer on the floor.
4. Once the revitalizer is spread evenly, let it dry fully before you move furniture back in place or allow foot traffic on the floors.