What is an aircraft rigging?
Table of Contents
What is an aircraft rigging?
Rigging is the proper installation of airframe components (wings, ailerons and tail surfaces) designed to do a specific aerodynamic job and contribute to the aircraft’s overall performance, stability and safety. All aircraft performance data is based on the aircraft being rigged properly.
What are the 5 components major sub assemblies of an aircraft?
Subcomponents. The subcomponents of an airplane include the airframe, electrical system, flight controls, and brakes. The airframe is the basic structure of an aircraft and is designed to withstand all aerodynamic forces, as well as the stresses imposed by the weight of the fuel, crew, and payload.
What is a rig pin?
The Rig Pin Kit System (RPKS)is a molded case that contains and organizes a set of pins with the remove before flight flags. The part number and size is lasered over the pin cavity and on the pin. Other information on the top of the case is the contents, ID, and aircraft type.
What is a chord on a plane?
The distance between the leading and trailing edge of the wing, measured parallel to the normal airflow over the wing, is known as the chord. Most commercial transport airplanes have wings that are both tapered and swept with the result that the width of the wing changes along its entire length.
Which is fuselage component?
2.2. The fuselage of a transport aircraft is a cylindrical shell consisting of the skin, longitudinal stringers and longerons, and transverse frames and bulkheads.
What is cable tension in aircraft?
Cable tension is determined by measuring the amount of force needed to make an offset in the cable between two hardened steel blocks called anvils. A riser or plunger is pressed against the cable to form the offset.
What are rigging tools?
Answer: Rigging equipment assist in moving heavy loads from one place to another on a construction or industrial site safely. These devices can include chain blocks, winches, lever blocks, cranes, mechanical hoists, block and tackle, trolleys, lifting slings, pulleys, sheave blocks and many more.