What does PAR mean in LED light bulbs?

parabolic aluminized reflector
PAR stands for “parabolic aluminized reflector.” These bulbs have a lamp, reflector, and pressed lens inside the lamp to provide directional lighting. They have a shorter body than BR light bulbs with a bowl shape. PAR light bulbs have soft light, but with a more defined edge than BR bulbs.

What does PAR 38 mean on a light bulb?

Parabolic aluminized reflector
What are PAR38 Bulbs? Parabolic aluminized reflector (PAR) 38 bulbs control light more precisely. LED PAR lights produce about four times the concentrated light intensity of general service A shape incandescents, and are used in recessed and track lighting. Therefore, a PAR 38 is 4.75 inches in diameter.

Are PAR and BR bulbs interchangeable?

You can swap these bulb types to change from wide to spot, depending on what you need in each location. BR and PAR LED replacements for your traditional flood or spotlight bulbs not only create a different style light beam from each other, the bulbs also look different.

What are the two prong bulbs called?

Bi-pin or Bipin is sometimes referred to as bi-pin cap, bi-pin socket, or two-pin. This is a type of lamp fitting, which is included in the IEC standard. These fittings are often used on small incandescent light bulbs, particularly halogen lamps.

What is the difference between PAR 30 and PAR 38?

Now the bad news: PAR38 and PAR30 refer to the physical characteristics of the bulbs. PAR = Parabolic Aluminized Reflector, 38 = thirty-eight eighths of an inch, or 38*1/8″=4.75″. 30 = thirty eighths of an inch, or 30*1/8″=3.75″. As you can see, PAR38 has a larger diameter than a PAR30 bulb or can.

Are PAR38 and BR30 interchangeable?

Size comparison of PAR vs BR floodlights The number represents increments of an 8th of an inch. For example, a BR30 is 30/8ths of an inch or 30 divided by 8 which equals 3.75″ in diameter. The same example applies to a PAR38. Divide 38/8ths of an inch or 38 divided by 8 which equals 4.75″ in diameter.

What is the difference between par 30 and par 38?

Can you use PAR30 instead of PAR38?

PAR30 bulbs are great for larger rooms where multiple light fixtures are being used. Short neck PAR30 bulbs are more common for tracking lighting while long neck PAR30 bulbs are useful for recessed cans. PAR38 BULBS are primarily used for outdoor lighting….The Ultimate Guide to LED Spotlight Bulbs: PAR20, PAR30, PAR38.

What is the difference between PAR 38 and r40?

PAR38 will fit – the number denotes eighths of inches wide, so PAR38= 38/8″ width, or 4 3/4″w. A BR40 is 40/8″ inch wide, or 5″ wide. About the same size and will fit in the same fixtures.

Can I use PAR30 instead of PAR20?

PAR30, PAR20, and PAR16 bulbs are great replacements for incandescent bulbs but can easily replace other LED bulbs, such as BR (Bulged Reflector) bulbs. PAR Bulbs and BR bulbs are virtually interchangeable as far as the fixture, but the type of light they produce is much different.