What is Issabel?

Issabel is an Open Source Software that brings together IP Communications Services in one place. It’s a platform that simplifies the management of your business interaction channels, incorporating a Telephone exchange (VoIP) with email, CRM, fax, videoconference, recording, reports and more.

How do you use Issabel?

Issabel is an Open Source Unified Communications Software….Verify SIP Registration

1. Click PBX menu.
2. Select Tools .
3. Select Asterisk-Cli .
4. Type the following command: sip show registry.
5. Click Execute button.
6. Verify the state is Registered .

How do I set up Issabel?

For configuring your Issabel, open Issabel web console, and select “PBX Configuration” from the “PBX” menu. In the “Unembedded IssabelPBX” area, select “Asterisk Manager Users” from the “Settings” menu. In the “Add Manager” section enter user, secret, and IP address. and click on the “Submit Changes” button.

What is trunk Issabel?

Trunk will handle the incoming and outgoing calls, Outbound Caller ID will be mentioned in Trunk, to transfer the call to outside choose the respective Trunk name on Outbound Routes.

How do I create an inbound route in Issabel?

Navigate to left hand menu & select Inbound Routes. Scroll down to Set Destination. This is where you decide from where you want to redirect incoming calls.. Select from the dropdown box and click Submit to save your changes and complete the setup.

How do you make an Asterisk SIP trunk?

Step by Step How to setup SIP trunks in Asterisk?

1. Login to your Asterisk PBX admin interface, go to Connectivity tab and click on Trunks and select the option of Add SIP Trunk and then give a name for the trunk as didforsale_1 and add the trunk Parameter as shown below: host=209.216.2.211.
2. Step2 :
3. Create Inbound routes.