Can you charge a NiCad battery with a lead acid charger?

NiCads are not to be charged with lead-acid purposed chargers though they are common and available, and unfortunately used. They are to be charged with a constant current and monitored until the cell voltages level off. Many people track the individual voltage in each cell to ensure they are balanced.

Do NiCad batteries need a special charger?

Charging NiCd batteries Another unique feature of NiCad batteries lies in the way they charge. When charging NiCad batteries, a charge rate of c/10 (10\% of capacity) is normally used, with the exceptions being speed chargers, which charge at either c/1 (100\% capacity) or c/2 (50\% capacity).

Can you charge a battery with a different voltage?

A: A 12V car battery can be safely charged over a range of voltages. These higher voltages allow the battery to be charged faster. But if you want to leave the battery on the charger to keep it topped off, a float voltage of 13.6V to 13.8V is usually used. For more information on charging lead acid batteries look here.

Can you charge 18v battery with 12V charger?

Theoretically, you can charge your car battery with a 12V power supply. For a car battery to be good enough for use, it will need to read at least 13.8V. So if you are charging it with a 12V power supply, you can only get as much as 12V in the battery. It won’t charge it higher than 12V.

Can you charge NiCd batteries?

NiCd batteries designed for fast charging can be charged with currents that are several times the C-rating without extensive heat buildup. In fact, NiCd is the only battery that can be ultra-fast charged with minimal stress. Cells made for ultra-fast charging can be charged to 70 percent in minutes.

Can you still buy NiCd batteries?

NiCd’s are available in the following battery sizes: AA, AAA, C, Sub C, D, and 9 Volt, and we offer NiCd Rechargeable Batteries with Tabs, Flat-Tops, and have eye-popping NiCd Batteries and Charger Combos!

How do you charge a NiCd battery?

The cheapest and safest way to charge a NiCd battery is to charge at 10\% of its rated capacity per hour for 16 hours. The battery pack used contained two AA-size 1200-mAh NiCd cells, so the battery should be charged with 120-mA current.

How do you charge a NiCad battery?

The cheapest way to charge a nickel cadmium battery is to charge at C/10 (10\% of the rated capacity per hour) for 16 hours.. So a 100 mAH battery would be charged at 10 mA for 16 hours. This method does not require an end-of-charge sensor and ensures a full charge.

What is the voltage of a fully charged NiCd?

1.2V
A NiCd cell, regardless of capacity has a nominal voltage of 1.2V. When fully charged it will have slightly higher voltage and it is considered to be fully discharged when it is down to 1.1V. The capacity of NiCds is measured in milli-amp hours (maH), the average current drawn times the time in hours.