How do you find the density of coal?

Since density of water is @ 1 gm/1 cc ( 1000 litres/ m^3), you can take weight of water as equal to volume of the piece of coal. ((Specific gravity of water is 1) Divide the weight of coal by the volume of water to get the density of coal. Use digital balance in all the measurements.

What is the density of coal?

Coal is slightly denser than water (1.0 megagram per cubic metre) and significantly less dense than most rock and mineral matter (e.g., shale has a density of about 2.7 megagrams per cubic metre and pyrite of 5.0 megagrams per cubic metre).

Why do we measure bulk density of coal?

The bulk density, like the material volume, is particularly important for aggregates used in civil engineering [1, 2] since they act as volume fillers to concrete mixes. However, this parameter is important also for coal [3], especially in the case of measuring the stored coal amount in the landfill.

Which method is used for determination of true density?

A method using the gas-comparison pycnometer with helium gas as the penetrating medium measures precisely the true volume of a pulverized coal sample. The true density of a solid is calculated as the true unit volume of the solid exclusive of its pore space which is divided into the weight of the sample.

How is true density measured?

True densities are measured using helium gas since it will penetrate every surface flaw down to about one Angstrom, thereby enabling the measurement of powder volumes with great accuracy.

What is the density of bituminous coal?

approximately 1,796 kg/m3
The carbon content of bituminous coal is around 45–86\%; the rest is composed of water, air, hydrogen, and sulfur, which have not been driven off from the macerals. Bank density is approximately 1,796 kg/m3 (112.1 lb/cu ft).

What do you know about coal?

Coal is a combustible black or brownish-black sedimentary rock, formed as rock strata called coal seams. Coal is mostly carbon with variable amounts of other elements, chiefly hydrogen, sulfur, oxygen, and nitrogen. Coal is primarily used as a fuel.

How much does a cubic meter of coal weigh?

Therefore one cubic metre of anthracite would (on his figures) be over 1.4 tonnes. One cubic yard would therefore be about 1.08 tonnes.

What is bulk density test?

The bulk density test is a classification test carried out for cohesive soils. Bulk density is the mass of the soil sample per unit volume including voids, or the weight of the soil sample for a given volume. High bulk density indicates low soil porosity and soil compaction.

How do you find real density?

Starts here6:44The difference between bulk and true density and how to measure themYouTube

How is porosity calculated?

Porosity = ( ( Total Volume – Volume of the Solid ) / Total Volume ) x 100\%. A larger percentage means that the rock has the ability to hold more water.