How do I reset my Xiaomi home security camera?

Make sure that the power to the security camera is already disconnected. Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the side with contact points must be facing down). Press and hold the Reset button to restore your device to factory settings.

Why is my Yi camera light yellow?

Most of the time, this problem with the stuck yellow LED is solved by inserting a formatted micro SD card compatible with the camera.

How do I Unbrick my MI camera?

Mi Home Security Camera 360 Unbrick Method for MJSXJ05CM Model

1. Get a 16GB or 32GB micro SD card.
2. Format it with your computer in FAT 32 (this is important as many SD cards are exFAT format)
3. Copy the “tf_recovery.img” file onto the micro SD card you just formatted using FAT32.
4. Switch off your Mi Home Security Camera.

How do I start my MI camera?

Connect and Install MI Security Camera 360 on Phone

1. First of all, you need to download and install the Mi Home app on your smartphone.
2. Next, open the app and sign in with your Mi account credentials.
3. On the next screen, tap on the “+” (Add device) button given on the top right corner.

What is the status light on Yi camera?

When the camera is restarted after has been turned off on the app, the status light will be on the default mode.

How do I update my Yi camera firmware?

If YI Smart Dashcam can boot normally:

1. Download firmware.
2. Insert the MicroSD card in the camera.
3. Connect the camera to a power source, then switch on the camera.
4. A firmware update notice will pop up on the screen.
5. Press the fourth button (Power and Setting) to update.

How do I update my MI camera firmware?

View camera firmware version

1. Configure the camera using the Mi Home app.
2. Open the camera in the app and touch the 3 dots in the upper right corner.
3. Select the option “General Settings”, and then “Check for firmware upgrades”
4. The current firmware version is presented on the screen.

Why are my security cameras not working?

Reboot the security camera Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.