Mixed

Can I use a different size fuse?

Can I use a different size fuse?

Do not replace a blown fuse with one that has a higher amperage rating. The fuse has a specific amperage rating because it is intended to be the weak link in the circuit to protect the electrical components. A blown fuse indicates excessive current has entered the circuit.

Is it OK to replace a 3amp fuse with a 5 amp fuse?

A 3A fuse was used for a reason. If you replace it with a 5A fuse you will lose part of the protection the 3A fuse was intended to provide. In case of a failure of the device the fuse is suppose to protect, the result of using a larger fuse could be to damage the device to the extent that it could not be repaired.

READ ALSO:   Why are cranes so tall?

What happens if I use a bigger fuse?

If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill. Rather than risk blowing the circuit, take the car to a repair shop to determine what is causing the fuse to repeatedly blow.

Can I replace a 3amp fuse with a 13 amp fuse?

The plugs are marked as such because they can handle a maximum of 13A of current. It is a mistake for people to assume that a 13A fuse should be used in this appliance. The 13A fuse is on the plug. The power rating is so low that we can quickly see that the fuse is too high and needs to be changed to a 3A one.

What uses 3amp fuse?

Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red). For example: 3A Fuse – Table lamp, standard lamp, television, video, computer, mixer, blender, fridge, freezer, power drill, jig saw, soldering iron.

READ ALSO:   Why do different materials have different specific heat capacity values?

What happens when you use the wrong size fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.