Advice

How do you use BeagleBone blue?

by Author

How do you use BeagleBone blue?

Preparation

  1. STEP1. Update the latest image. When you receive a BeagleBone®Blue from seeed, the image is already burned into the on-board eMMC.
  2. STEP2. Power and boot. Connect the BeagleBone® Blue to your computer with the Micro-USB Cable.
  3. STEP3. Browse to your Beagle.
  4. STEP4. Connect to wifi.

How do I connect to BeagleBone?

SSH: BeagleBone’s IP Address

  1. Connect the BeagleBone Black to your computer using the USB cable.
  2. Open up PuTTy-SSH and click on the SSH radio button.
  3. In Host Name, type in: 192.168. 7.2 and press Open at the bottom.
  4. Log on as ‘root’ and press enter for the password. You are now connected!

How do I connect BeagleBone black with USB?

Follow these steps:

  1. Open PuTTY.
  2. In the PuTTY Configuration dialog box, select Serial.
  3. Type the name of your BeagleBone Black’s serial port.
  4. Type 115200 in the Speed field.
  5. Click Open.
  6. Power on your BeagleBone Black with a Mini USB cable.
  7. When you’re asked to log in, type root and press Enter.
READ ALSO:   What is the average cost of keratin treatment?

What is BeagleBone black microcontroller?

The BeagleBone Black Rev C is a powerful microcontroller with 4GB eMMC flash and the Debian Linux OS. The BeagleBone Black Rev C features TI AM335x ARM Cortex A8 processor running at 1Ghz. It has 512MB of RAM and 4GB of flash for building sophisticated robot software with a microSD card slot for additional storage.

How do I connect my BeagleBone to my computer?

With PuTTY installed, power up your BeagleBone and follow these steps:

  1. Connect your BeagleBone to your computer by using a Mini USB cable.
  2. Open PuTTY.
  3. In the PuTTY Configuration dialog box, select SSH.
  4. Type 192.168.
  5. Click Open.
  6. When you’re asked to log in, type root and press Enter.