Can I install an irrigation system myself?

Many homeowners choose to hire a contractor to install a sprinkler system, as constructing a DIY sprinkler system can be a challenging project for someone to complete on their own. However, with the right supplies and a little know-how, you can construct your own sprinkler system and save some money on labor costs.

What size pipe should I use for irrigation?

From the Water Source Holding the bulk of the water volume, this pipe size should range from 2 to 3 inches in diameter. You need this diameter so the water pressure is not significantly reduced before entering the garden. Choosing the larger 3-inch pipe provides you with some flexibility for future expansion.

How deep does a sprinkler system need to be?

In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.

How many zones do I need for my sprinkler system?

Draw Your Sprinkler Zone Plan With simple math, you can determine how many heads in each zone and then take the total number of sprinklers you need, and divide that by your head/zone number and that will tell you how many zones you need.

How deep do irrigation pipes need to be?

8 to 12 inches
Basic Depth Requirements In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.

How do I find my sprinklers before digging?

If you prefer to locate the lines and heads of your system without digging, rent a valve locator or even a metal detector and mark areas once found – better yet, call call 811, a federally mandated service, and ask someone to come out and locate the system for you.

How far do you bury sprinkler lines?

In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.

How many sprinklers can I run on one line?

For example, you generally have a flow rate of 10 gpm from a ¾-inch spigot where you connect your hose. With your 10 gpm flow rate at your spigot, you could run two sprinklers at 5 gpm each. The best set-up is to run two hoses from the spigot–each to one sprinkler.

Is it bad to water grass at night?

“A wet lawn at night is the perfect condition for fungus to grow. Along with cutting grass too short, watering at night is about the worst thing you can do to a lawn.” As a general rule, you should water long enough to moisten the soil down to about 6 inches, which is the average depth of a healthy grass-root system.