How do I change a circuit to Norton equivalent?

Norton’s theorem states that a linear two-terminal circuit can be replaced by an equivalent circuit consisting of a current source IN in parallel with a resistor RN, where IN is the short-circuit current through the terminals and RN is the input or equivalent resistance at the terminals when the independent sources are …

What are the steps for solving Norton’s Theorem?

The basic procedure for solving a circuit using Nortons Theorem is as follows:

1. Remove the load resistor RL or component concerned.
2. Find RS by shorting all voltage sources or by open circuiting all the current sources.
3. Find IS by placing a shorting link on the output terminals A and B.

What is the main difference between Norton and Thevenin’s equivalent circuit?

What is the difference between Thevenin and Norton theorems? – Norton’s theorem uses a current source, whereas Thevenin’s theorem uses a voltage source. – Thevenin’s theorem uses a resistor in series, while Norton’s theorem uses a resister set in parallel with the source.

What is the Norton equivalent current?

Norton’s equivalent circuit resembles a practical current source. Hence, it is having a current source in parallel with a resistor. The current source present in the Norton’s equivalent circuit is called as Norton’s equivalent current or simply Norton’s current IN.

What is Norton and superposition theorem?

Superposition theorem Before to know Thévenin and Norton, is necessary to learn this theorem. It is useful to analyze circuits with many voltage and current sources. In this method, voltage source can be replaced by short-circuits and a current source can be replaced by an open circuit.

What is Norton current?

It states that any two terminal linear network or circuit can be represented with an equivalent network or circuit, which consists of a current source in parallel with a resistor. The current source present in the Norton’s equivalent circuit is called as Norton’s equivalent current or simply Norton’s current IN.

What is equivalent circuit?

Definition of equivalent circuit : an electric circuit made up of the basic elements resistance, inductance, and capacitance in a simple arrangement such that its performance would duplicate that of a more complicated circuit or network.

How do you convert into Thevenin circuit?

Remember the three step process:

1. Find the Thevenin Resistance by removing all voltage sources and load.
2. Find the Thevenin Voltage by reconnecting the voltage sources.
3. Use the Thevenin Resistance and Voltage to find the total current flowing through the load.