How do you adjust the preload on a rockshox?

External spring preload adjustment compresses or decompresses the spring without initiating travel. Turn the preload adjuster knob clockwise to increase spring preload and decrease sag. Turn the preload adjuster knob counter- clockwise to decrease spring preload and increase sag.

What is preload on a MTB fork?

It’s simply the initial compression of the internal spring in the fork. The more it’s compressed, the stiffer the fork will feel. Bigger preload compresses the spring more, and so it’s best for heavier riders and/or people who need/prefer the stiffer ride (racers etc.) Lighter riders should use less(-) preload.

What is preload MTB?

When it comes to mountain bike shocks, the preload refers to the amount of sag the shocks allow when the bike is at rest with only the rider’s weight bearing down on it. If it’s too low, your shocks won’t be supportive when you need them to be.

What is lockout on mountain bike forks?

A Lockout is a small switch placed atop the front right stanchion of your MTB/Hybrid Bicycle’s suspension which when engaged decreases the low speed compression rate of the front fork, adjustable to the point of being fully rigid.

What does preload do on a mountain bike?

Preload is used to adjust the shock or spring to the correct range of operation within the suspension’s travel-more preload will raise the bike up on its suspension, keeping you near the top of its travel. With less preload, the bike sits lower and closer to the bottom of its suspension travel.

How do you adjust preload on a suspension?

Suspension Setup Guide

1. Keep detailed notes on all your settings so that you can refer back to them.
2. The front preload adjuster is the large nut on top of the fork tube.
3. Rear preload is adjusted by turning the collar on top of the spring, either in notched increments or turns of a threaded adjuster.

What is preload on MTB forks?

It’s simply the initial compression of the internal spring in the fork. The more it’s compressed, the stiffer the fork will feel. Bigger preload compresses the spring more, and so it’s best for heavier riders and/or people who need/prefer the stiffer ride (racers etc.)

What is preload on a MTB?

The preload refers to the amount of sag the shock will allow when the bike is at rest with the rider’s weight bearing down on it. Determining the correct preload is important because if it’s too high, it takes more energy to move the shock and compress the springs, resulting in a harder and desensitized shock system.