How do you fix a cut hole in the ceiling?

Drywall Ceiling Repair for Large Holes

1. Cut a rectangle around the damaged area.
2. Add wooden cleats behind each side for support.
3. Attach a patch piece to the cleats.
4. Place mesh tape over the patch piece and spread joint compound.
5. Apply a second and third coat of the compound over repairs and then sand until smooth.

How do you cover an old ceiling light hole?

If you are not going to replace your old light fixture, cover the hole with a piece of drywall for a permanent fix. Use the same thickness of drywall as the surrounding ceiling, and cut the patch piece as close to the size of the hole as possible.

How do I make drywall holes smaller?

Small Opening

1. Measure the length or height of the side of the drywall opening, such as the side of the electrical outlet.
2. Cut a piece of corner bead to fit the length or height using tin snips.
3. Apply a thin layer of joint compound along the edge of the hole with a putty knife.

How do I make a hole smaller?

Use Filler to Fill the Screw Hole

1. Fill the hole with liquid glue — For this, you can use wood glue or Elmer’s glue (Amazon affiliate link).
2. Fill stripped out the hole with toothpicks — Yes, toothpicks!
3. Start anew with your screw — Now that the hole is filled, you can completely start fresh and redrill the hole.

What causes tiny holes in ceiling?

Ceilings. Termites that are living in and feeding on your walls or ceilings often break through the drywall or wood, and drywood termites even create holes, known as “kickout holes” through which they dispose of their fecal matter and force out waste. Termites sometimes even fall through these holes.

How do you cover a can light hole?

Covering these holes is as simple as applying a patch to the drywall and painting over the patches to match the color of the paint on the ceiling. If your ceiling has not been painted in a while, you may need to repaint the entire ceiling to get a perfect match.