How do you PXE boot?

On Intel® Desktop Boards that support the Pre-boot Execution Environment (PXE), you can set the network as a boot device….To enable the network as a boot device:

1. Press F2 during boot to enter BIOS Setup.
2. Go to the Boot menu.
3. Enable Boot to Network.
4. Press F10 to save and exit the BIOS Setup.

What is Realtek PXE?

The Preboot Execution Environment or PXE (commonly pronounced as pixie) is a client-server environment that enables network computers to boot over the network interface card (NIC), instead of from a CD-ROM or hard disk. PXE plays a key role in helping IT managers handle client machines without a storage device.

How do I exit a PXE boot?

You can disable the network boot as follows:

1. Press F2 during boot to enter BIOS Setup.
2. Go to Advanced > Boot > Boot Configuration.
3. In the Boot Devices pane, disable Network Boot.
4. Press F10 to exit BIOS Setup.

How do I skip PXE over IPv4?

Disable the Onboard NIC

1. Open the BIOS.
2. Go to the Boot tab.
3. In case you have this option, it will be most likely located directly in the Boot tab. If so, use the up and down keys to get to Boot Options. Press Enter to change them.
4. Another list will pop up. Look for a Disabled option.
5. Exit the BIOS, saving the changes.

What can Windows boot manager do?

When a computer with multiple boot entries includes at least one entry for Windows, the Windows Boot Manager, which resides in the root directory, starts the system and interacts with the user. It displays the boot menu, loads the selected system-specific boot loader, and passes the boot parameters to the boot loader.

What is PXE in BIOS?

Preboot Execution Environment(PXE) is a client-server interface that allows computers in a network to be booted from the server before deploying the obtained PC image in local and remote offices, for PXE enabled clients.