What is network line card?
Table of Contents
What is network line card?
A line card or digital line card is a modular electronic circuit designed to fit on a separate printed circuit board (PCB) and interface with a telecommunications access network. A line card can terminate a line supporting voice POTS service, ISDN service, DSL service, or proprietary ones.
What is the difference between network card and network interface card?
Technically, a NIC is a physical card that connects to an expansion slot in a computer. While the terms “NIC” and “network adapter” are often used synonymously, a NIC is a type of network adapter while a network adapter is not necessarily a NIC.
What is my network interface card?
From your computer, click Start, then Control Panel. Select Network and Internet Connections icon. Select the Network Connections icon. Under LAN or High-Speed Internet category, look for the name of the Ethernet card (Tip: words like Ethernet adapter, Ethernetlink, or LAN adapter may be contained in the card name).
What are the two types of NIC cards?
There are two types NIC they are,
- Ethernet NIC.
- Wireless Network NIC.
What is line card in router?
A printed circuit board that provides a transmitting/receiving port for a local area network (LAN) or a carrier’s telephone or wide area network (WAN). Line cards plug into telephone company switches and high-end routers, which have a modular chassis that accepts a range of cards.
What is line card in Cisco?
The MSC, FP, and LSP card, also called line cards, are the Layer 3 forwarding engine in the Cisco CRS 8-slot Line Card Chassis Enhanced router. A line card can be paired with different types of PLIMs to provide a variety of packet interfaces, such as OC-192 POS and OC-48 POS.
Is NIC and Ethernet card same?
It’s basically an Ethernet port, NIC stands for Network Interface Card, so the NIC port is typically the port in the back of your computer where you connect the network cable to your router. NIC (network interface card) is a broader term than Ethernet card.
How do I find my network card using CMD?
Type cmd in the Open prompt of the Run menu and click OK to launch a command prompt window. Type ipconfig /all at the command prompt to check the network card settings. The IP number and MAC address are listed by ipconfig under IP Address and Physical Address.
How do I install a network interface card?
In This Article
- Assemble your materials.
- Shut down Windows, turn off the computer and unplug it.
- Remove the cover from your computer.
- Find an unused expansion slot inside the computer.
- Remove the metal slot protector from the back of the computer’s chassis.
- Insert the network interface card into the slot.
Why is network card important?
The network interface card (NIC) or network card is the hardware device most essential to establishing communication between computers. The NIC is responsible for preparing the data to be sent over the network medium.