What is neutral section in electric traction?

Neutral Section is defined as short insulated dead overhead equipment separating sectors fed by two adjacent substations which are normally connected to different phases. The neutral section is a dead zone and therefore, the locomotive has to negotiate the section in momentum.

What is pantograph in locomotive?

Pantographs are a special devices mounted on electric trains to collect current from one or several contact wires. They consist of a pantograph head, frame, base, and drive system, and their geometrical shape is variable.

What is the importance of section insulator?

Section Insulator is a device installed along with the contact wire for insulating two elementary sections where the pantograph of the locomotive negotiates smoothly and maintaining the current continuity. It is used in crossover, turnouts, maintenance pits and yard line, etc.

How many volts is a train rail?

At any rate, 14.5 volts is about right for HO, 18 is too high although most Digitrax decoders can take 22 volts, other can only take about 20 (large scale trains often run higher voltages – 18 for O, 20 for G.

What is uninsulated overlap?

Type # 3. Insulated overlaps are installed chiefly for providing isolating facilities required for the operation and maintenance of OHE. In case two lengths of OHE belong to two adjacent elementary sections, there will be insulated overlap span.

How many volts does a train have?

Standardised voltages

How do you lower a train pantograph?

Pantographs are typically operated by compressed air from the vehicle’s braking system, either to raise the unit and hold it against the conductor or, when springs are used to effect the extension, to lower it. As a precaution against loss of pressure in the second case, the arm is held in the down position by a catch.