Why is my atomic clock not resetting?

If your clock did not change with Daylight Savings Time (DST), make sure the DST switch on the back of the clock is set to ON. If your clock is off by increments of an hour, the Time Zone (TZ) is set incorrectly. Check the Time Zone switch on the back of the clock. If the problem persists, we have a one year warranty.

How do I reset my sharp atomic clock?

The clock will automatically leave manual mode after the SET button is not pressed for 6+ seconds. If the clock does not respond to the various function modes, you can reset the clock by pressing the RESET button on the movement case.

Why is my atomic clock not working?

Try powering down the clock (unplug it or remove the batteries), then turn it on again to see if it synchronizes. If the clock uses batteries, check them and replace if necessary. If the radio controlled clock is a desk top unit, try rotating it 90 degrees.

How do I sync my atomic clock?

How to Sync Your System Clock to Atomic. Right click the time in the tray of your Taskbar and click Adjust date/time. This will open a Settings window with a number of available options. First, ensure that both Set time automatically and Set time zone automatically are slid to On.

Why did my atomic clock lose an hour?

If the atomic radio controlled clock is off by one or more hours, it probably has to do with the time zone setting. Make sure the time zone has been properly selected using the instructions that came with the clock. When purchasing a clock, make sure that it can display the correct time zone.

Why is my atomic clock off by 4 hours?

If the atomic radio controlled clock is off by one or more hours, it probably has to do with the time zone setting. Other atomic wall clocks may allow the selection of any time zone, even time zones that are outside the WWVB coverage area. When purchasing a clock, make sure that it can display the correct time zone.