Are finials standard size?

Finial sizes vary greatly. A finial can have a length as small as 1.5 inches or as long as 9 inches.

What is an end cap finial?

Finials are the decorative end pieces that fit into the ends of the drapery rod to give it a finished, ornamental look. End caps are smaller and simpler than finials, for rooms that call for a more sleek, modern appearance, or in situations where a finial is too large for the space available.

What are the things on the end of curtain rods called?

The focal point of your drapery rod is the finial. From simple geometric shapes to elaborate floral designs, the finial sets the tone of your window treatment. Wood, metal, wrought iron, glass, crystal and even marble options are available.

Are curtain rod finials universal?

Are curtain rod finials interchangeable? Absolutely. If you feel like changing things up, finials are easily removable.

How do you measure finial size?

The easiest way to measure the diameter is to remove the finial from one end and measure straight across the end of the rod from one side to the other. See our Glossary section for a diagram of Diameter. (Do not measure around the outside of the rod, as this is the Circumference not the Diameter.)

What do finials screw into?

Lamps and light fixtures Finials are twisted onto the lamp harp. Typically the finial is externally decorative whilst hiding an internal screw thread. There are several standard thread sizes which are used.

How do you make a finial curtain rod?

These DIY curtain rod pinecone finials add warmth and beauty to a family room, dining room or kitchen. Use corks to connect the pinecones to your curtain rod. Insert the cork into your curtain rod, and use hot glue to attach the pinecone to the cork. That’s it!

How do you remove the end of a curtain rod?

Examine one of the finial ball ends of the curtain rod. Twist the ball counterclockwise while holding the rod steady. If the ball loosens, continue twisting until it is off the curtain rod. If it does not loosen, repeat the process with the other end.

How do you get finial out of a curtain rod?

What thread size are finials?

A. Most lamp finials have a ¼-27 thread and screw onto a lamp harp. Some lamps do require a finial with a larger hole. This is usually a 1/8-ip thread and measures approximately 3/8″ in diameter.

What are curtain rod finials and how are they used?

Bed Bath & Beyond is here to help. In short, finials are knobs that are placed at the end of the curtain rods for a decorative touch. They’re a decorative way to prevent the window curtain from sliding off when you’re opening your drapes for the day. However, curtain rod finials can also be used as an accent piece to the room’s décor.

How do you drill a dowel curtain rod?

Drill pilot holes into the center of both ends of the wooden dowel curtain rod, if necessary. Some pole rods come with the holes pre-drilled. Twist the exposed screw portion of the finials into the ends of the dowel curtain rod until the finials fit flush against the rod.

How do you attach pipe caps to a curtain rod?

Push the pipe caps onto the ends of the curtain rod after the adhesive hardens. If you wish to make the finials permanent, apply epoxy to the ends of the rod and inside the pipe caps before fitting the caps onto the rod.

How do I choose the best finials for pipe rods?

If you wish to make the finials permanent, apply epoxy to the ends of the rod and inside the pipe caps before fitting the caps onto the rod. Select two solid wood decorative objects to use as finials. There are numerous wooden objects from which to choose, and many are available in craft stores and the millwork aisle of hardware stores.