Can I connect condenser mic to phone?
Table of Contents
Can I connect condenser mic to phone?
If you decide to use a condenser microphone you will most likely need to purchase a device that can convert the XLR connector of the microphone to the small 1/8” (3.5mm) connector of your smart device, as well as provide the phantom power that condenser microphones require.
Are all condenser mics electret?
Probably ninety-five percent of the condenser microphones on the market are the electret type. The electret has a charged backplate that is created when we manufacture the microphone. A true condenser, on the other hand, continuously requires an external charge.
Where are electret microphones used?
Electret microphones enable communication and recording in devices including telephones, smartphones, desktop computers, tablets, headsets, high-performance recording systems, hearing aids, megaphones and more. Due to their proliferation, almost everyone uses this type of microphone on an everyday basis.
How do I identify my electret microphone?
Best Answer
- get a power supply, say 5V.
- connect GND to the – of the mic.
- connect 5V to a 22k resistor, the other side of the resistor goes to the mic.
- connect your oscilloscope between GND and the + pin of the mic.
- start whistling, alter two frequencies.
Are electret microphones good?
Since then, they have improved dramatically. Today, electret designs are among the very best of all microphones, including those made by top manufacturers like DPA, AKG and Audio-Technica. The difference between a traditional “true,” or capacitor mic, and an electret design is in the way the capsule is polarized.
What is electret condenser?
Electret condenser microphones are used to convert sound into an electrical signal and are used in a wide variety of consumer electronic products, including mobile phones, GPS devices, and speech recognition equipment.
Is an electret microphone a condenser microphone?
An electret, or back-electret microphone, is one type of capacitor/condenser microphone. All capacitor microphones work by having an electrical charge applied. As the sound waves strike the diaphragm and make it move relative to the backplate, the electrical value of the capacitor changes.