Do most wrenches come in both standard and metric sizes?
Table of Contents
Do most wrenches come in both standard and metric sizes?
There is a bit of a difference in the application of the two different wrenches. The standard wrench is made more specifically for use in North America as the measurement is in the American system. Whereas, the metric wrenches can be used with nuts and bolts that have been made according to the metric measurements.
What are the metric wrench sizes in order?
Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
What is a 3/8 wrench in metric?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
Can you use metric on SAE?
Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.
What size is 18mm in SAE?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 18mm | 0.709 | |
| 23/32″ | 0.719 | |
| 19mm | 0.748 | |
| 3/4″ | 0.75 |
Are metric and SAE the same?
Metric and SAE wrenches have different systems of measurement. Metric sockets and wrenches use the metric measurement system. SAE wrenches use the imperial measurement system, mostly used in the United States, where it’s described using inches, or fractions of an inch.
Can I use SAE on metric?
What is the difference between metric and SAE wrenches?
The SAE wrench set contains eight pieces with sizes between 5/16 inches and 3/4 inches. The metric wrench set has 12 pieces, ranging in size from 8 mm to 19 mm.
Do you have more SAE or metric wrenches in your tool box?
If you live in the U.S., chances are you have more SAE wrenches in your tool box. And for our international readers, you likely have more metric wrenches in yours. Whatever the case may be, our wrench conversion chart will give you the best-fitting standard or metric wrench for a given bolt size.
What is the difference between SAE and Si wrench sizes?
SAE & Metric Wrench Conversions SAE Wrench Size Bolt Size (SI) Metric Wrench Size 5/16″ 1/8″ 8 mm 3/8″ 3/16″ 10 mm 7/16″ 1/4″ 11 mm 1/2″ 5/16″ 13 mm
What size wrench do I need for a metric bolt?
Chances are that there will be two eligible wrench sizes that you can use (1 SAE & 1 MM). If you’re looking to find the right wrench for a metric bolt, the conversion is very much the same. Once you’ve identified which metric wrench you would use, look at the chart to locate its SAE counterpart.
Is it better to have SAE or metric parts on hand?
It is always better to have both SAE and metric on hand just in case. Most sets these days come with conversion charts for ease of use. If you want to be really prepared, there are sets that come in both SAE and metric sizes so that you can be ready no matter what.