Is it OK to mix SAE 30 and 10W30?

Yes, you can make use 10W30 engine oil instead of the SAE30 in your Lawn Mower. Older engines can use the SAE30, while the 10W30 is for modern engines. Again, the SAE30 is better for warmer temperatures while the 10W30 is suitable for varying temperature ranges and also works well in cold weather.

What does SAE 10W30 mean?

For Example: 10W30 This means the viscosity is at 10W when the engine is cold and 30 when the engine is hot. Low viscosities are good for cold temperatures (hence the “W” association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly.

Is SAE 30 Good for lawn mower?

Lawn mower oil type recommendations Learn which one to choose for your climate. SAE 30- Warmer temperatures, most common oil for small engines. Synthetic SAE 5W-30- Best protection at all temperatures as well as improved starting with less oil consumption.

Can you use 10W30 oil in place of sae30?

Yes, you can make use 10W30 engine oil instead of the SAE30 in your Lawn Mower. But there are other factors you need to consider. These include temperature and the engine. Older engines can use the SAE30, while the 10W30 is for modern engines.

What kind of oil is SAE 30 for a mower?

Lawn mower oil type recommendations SAE 30 – Warmer temperatures, most common oil for small engines. SAE 10W-30 – Varying temperature range, this grade of oil improves cold-weather starting, but may increase oil consumption. Synthetic SAE 5W-30 – Best protection at all temperatures as well as improved starting with less oil consumption. SAE 5W-30 – Very cold temperatures.

Is 10W40 oil thicker than 10W30?

The two oil types differ in their high temperature viscosity , and 10w40 is thicker than 10w30 when it comes to high temperatures.

What does SAE 30 stand for?

The Society of Automotive Engineers (SAE) has established a numerical code system for grading motor oils according to their viscosity characteristics. The original viscosity grades were all mono-grades, e.g. a typical engine oil was a SAE 30. This is because all oils thin when heated, so to get the right film thickness at operating temperatures oil manufacturers needed to start with a thick oil.

https://www.youtube.com/watch?v=ki_5aeBzttw