What does the SAE number 4130 indicates?
Table of Contents
What does the SAE number 4130 indicates?
The 4130 is a code of the American Iron & Steel Institute and defines the approximate chemical composition of the steel. The “41” denotes a low alloy steel containing nominally 1 percent chromium and 0.2 percent molybdenum (hence the nickname “chromalloy”). The “30” denotes a carbon content of 0.30 percent.
What is the composition of the AISI 4130 steel and what is it used for?
4130 steel is a chromium-molybdenum alloy steel and is considered a low carbon steel. It has a density of 7.85 g/cm3 (0.284 lb/in3) and benefits from heat-treatment hardening. It is an exceptional welding steel, being weldable in all commercial methods, and is readily machined in its normalized/tempered condition.
Why AISI 4130 is better?
The steel has good strength and toughness, weldability and machinability. AISI/SAE 4130 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength. It shows good overall combinations of strength, toughness. and fatigue strength.
What’s the difference between 4130 and 4140?
4130 contains 0.28-0.33\% Carbon and 0.40-0.60\% Manganese, while 4140 contains 0.75-1.00\% Manganese and 0.38-0.43\% Carbon. – 4140 alloy steel has greater hardenability and strength than 4130. – 4130 steel is easier welding than AISI 4140 steel and its wear-resistant performance is lower than in 4140.
What are the major alloying elements in a 4130 AISI SAE steel What is the nominal carbon content?
The chemical composition of AISI 4130 alloy steel is listed in the following table….Chemical Composition.
| Element | Content (\%) |
|---|---|
| Carbon, C | 0.280 – 0.330 |
| Silicon, Si | 0.15 – 0.30 |
| Molybdenum, Mo | 0.15 – 0.25 |
| Sulfur, S | 0.040 |
Is 4130 a stainless steel?
Key points: Stainless steels are defined as low-carbon steels with at least 10\% chromium with or without other alloying elements. | AISI 4130 alloy steel has properties better than or similar to aircraft-grade stainless steels. | Alloy steels are less expensive and more-easily machined than standard stainless grades.
What’s the difference between 4130 and 4340 steel?
A：4130 steel has an excellent strength to weight ratio and is considerably stronger and harder than standard 1020 steel, but is not easily welded, requiring thermal treatment both before and after welding to avoid cold cracking. B：4340 steel is “ultra-high” strength steel classified a medium-carbon, low-alloy steel.
What type of material is 4130?
Aircraft quality 4130 alloy steel is a medium carbon, low alloy steel containing 0.15/0.25\% molybdenum and 0.80/1.10\% chromium as strengthening agents. This type of steel is also commonly referred to as a chromoly steel, or chrome moly steel.
What is 300M material?
300M is a high strength low alloy steel that is melted as AOD + VAR. This alloy is comparable to 4340 with increased alloying elements such as vanadium and silicon giving it slightly higher strength and toughness.
Is 4340m the same as 300M?
300M is a low alloy, vacuum melted, steel of very high strength. Essentially it is a modified AISI 4340 steel with silicon, vanadium and slightly greater carbon and molybdenum content than 4340. 300M has a very good combination of strength (280 to 305 ksi), toughness, fatigue strength and good ductility.