Can you lay laminate over particle board?

You can put laminate over particle board, but it is strongly advised to avoid this if possible. Particle board is very susceptible to moisture which can cause it to swell and deform. It’s also not a suitable subfloor when it comes to stability as it is not structurally supprotive.

Can you put laminate flooring on top of wood?

Laminate flooring can be installed directly over hardwood, often with no preparation necessary. If your laminate has a built-in underlayer, you may install it right on top of the hardwood. Installing a laminate floor over hardwood is a great option in many cases.

Can I use MDF under laminate flooring?

You can use MDF as underlayment but it is best used in areas not prone to moisture. Set MDF underlay over an uneven floor to create a smooth surface but be sure to use a water-resistant membrane or moisture-resistant MDF if moisture is likely.

How smooth does floor need to be for laminate?

Most manufacturers recommend that the floor be flat to within 3/16” in a 10 ft. radius. These measurements are consistent with most other types of floor coverings. On floating floors, vertical movement needs to be kept to a minimum.

Can you install vinyl plank flooring over particle board?

You can install vinyl plank over particle board, but it is not advised as particle board is very apt to waterlog, swelling, and distortion over time. If you must install vinyl plank over particle board, clean the particle board well, ensure that it is level, and install another subfloor above it.

Is particle board good for flooring?

Particleboard, which kind of looks like oatmeal, is comprised of small wood particles that are glued and formed into sheets. These boards, which are typically manufactured in 4″ x 8″ sheets, are not suitable as a subfloor. Structurally, they lack the strength and height needed for a hardwood flooring installation.

Can you put luxury vinyl planks over hardwood floors?

LVT planks are so versatile that they can be installed over nearly every kind of flooring — including hardwood flooring. Hardwood floors have been famously coveted for many years. No matter how well-maintained, hardwood flooring will need refinishing to restore it occasionally.

What is the best subfloor for laminate?

The appropriate types of subfloors for laminate flooring include:

• Exterior grade plywood.
• OSB board.
• Concrete (that is at least one month old)
• Existing wood that is not adhered to concrete.
• Vinyl that is not glued down to another subfloor.
• Ceramic.
• Terrazzo.
• Particle board.

Why does my laminate floor feels spongy?

A laminate floor that feels spongy can be caused by any of these 5 conditions: an uneven sub-floor, an underlayment issue, an expansion gap issue, water damage, or termite damage. It is also worth mentioning that an improper acclimation of the laminate floors prior to the installation could lead to soft spots overtime.