How do I create a section in Creo?

To create a section view,

1. Click Annotation and then, in the Setup group, click the arrow next to Dep View.
2. Click Create Section View. The Section View dialog box opens.
3. Click to complete the operation.

How do you make a 2D cross section in Creo?

1. Open a drawing.
2. Double-click an existing view.
3. Click Sections.
4. Click 2D cross-section.
5. Click in the Sections page to create a new 2D cross section.
6. Select Create New from the Name list in the Sections page.
7. Define the cross section as either Planar or Offset.
8. Click Done.

How do I show a section in Creo?

1. Open a drawing.
2. Double-click an existing view.
3. Use the View Type category to define the view orientation, such that the view you want to cross-section is oriented properly to the screen.
4. Click the Sections category.
5. Click 2D cross-section.

How do I create a partial section in Creo?

Partial views display geometry that exists inside of a sketched boundary.

1. Open a drawing with one or more views.
2. Double-click an existing view.
3. Click the Visible Area category.
4. Select Partial View from the View visibility list.

How do I create a local section view in Creo?

How to show local section view in CREO PARAMETRIC drawing?

1. Create a section in the model.
2. Select the view on which you want to create the local section.
3. Right Click-> Proprieties (or double click on the view).
4. Go to Sections and select 2D cross-section.
5. Pick your section in the lower window.

How do you make an offset section?

1. Open a part.
2. On the View tab, click the arrow next to Section.
3. Click Offset. The Section tab opens.
4. Select an existing sketch.
5. You can extend the cross section to one side of the sketch or both sides of the sketch using on the Section tab.
6. Click to change the clipping direction.
7. Click or middle-click.

How do I add a section line in Creo?

To draw section lines,

1. Click Annotation and then, in the Setup group, click the arrow next to Dep View.
2. Click Create Section View. The Section View dialog box opens.
3. Select the parent view in the viewport to activate the Section Line button.

How do I create a section view?

A full section view is generated by running the cutting plane through the entire length of the object being sectioned.

1. Click Layout tab Create View panel Section drop-down Full.
2. Click the view you want to use as the parent view.
3. Click in the drawing area to indicate the start point of the section line.

How do you create a cross section?

1. How to Draw a Cross-Section of a Map.
2. Take a thin strip of paper and place it along the transect line on the map.
3. On a piece of graph paper, draw the horizontal axis of your graph exactly the same length as the transect A-B.
4. Draw two vertical axes using a suitable scale.