Should RAM be in alternate slots?

3 Answers. It means that the colored pair is a dual channel set and that you should install RAM as a pair to take advantage of it. You should install 2 of the same sticks as a matching pair on the same color slots and then another 2 that are the same in the remaining two slots.

Why do you not put RAM next to each other?

1. Because that’s the way the slots are wired. 1 & 3 on one channel, 2 & 4 on the other channel. If that’s numbering the dimm slots sequentially going away from the CPU I’m not sure it’s correct if you want a dimm in each channel for dual channel operation.

Which slots should I put RAM into?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.

Which slots do I put RAM in for dual-channel?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Is it bad to put RAM side by side?

^ Unhinge the clips (on some motherboards, there is one clip, on others there are two—one on each end). Unseat the old RAM by pulling on each end, wiggling it up and down just a bit. Do not wiggle it from side to side. Never force a RAM module into a slot that doesn’t match the notch on the module.

Can you put 2 RAM sticks next to each other?

There’s a prevailing misconception you cannot use different RAM sizes together or that you cannot mix RAM brands. The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance.

What happens if you put RAM in slot 1 and 2?

Ram slots on motherboards are placed alongside each other. Thus Rams are therefore installed right next to each other. On many motherboards, installing 2 rams, of similar make, capacity and speed, will produce what is called Dual channel mode. This mode speeds up memory.

Can I put 2 sticks of RAM next to each other?

How do I make sure my RAM is running in dual-channel?

Open RUN , then type “msinfo32″ & enter. Now you can check. if your motherboard has 2 ram slots filled, it is dual-channel if it occupies one slot, it is single-channel and if it occupies 4 slots, it is quad-channel.