What is equivalent to a 19 mm socket?
What is equivalent to a 19 mm socket?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
1/2″ | 19mm | 3/4″ |
9/16″ | 21mm | 13/16″ |
22mm | 7/8″ | |
5/8″ | 24mm | 15/16″ |
Is a 19mm socket the same as 3 4?
19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch.
What sockets are the same in metric and standard?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
How big is a 19mm socket?
SAE to Metric Conversion Chart
SAE Size | Metric Size | Inches Decimal |
---|---|---|
19mm | 0.748 | |
3/4″ | 0.75 | |
25/32″ | 0.781 | |
20mm | 0.787 |
What SAE socket is close to 19mm?
SAE to Metric Conversion Chart
SAE | Metric | Inch |
---|---|---|
23/32″ | 0.719 | |
19mm | 0.748 | |
3/4″ | 0.75 | |
25/32″ | 0.781 |
Is there a 20 mm socket?
Capri Tools Deep Impact Socket, 3/8-Inch Drive, 6-Point, Metric (20 mm)
Will a 3/4 socket fit a 19mm nut?
No, there’s no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different. @Lathejockey81: You’re the first to mention the tolerances to which the socket is machined.
Can you use standard sockets for metric?
Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.