What is the purpose of the resistor connected to the collector of the transistor?

The resistors are used as a means of generating voltage drops and thereby pulling the transistor into the desired operating region. because you need to limit the current to semiconductor terminals. otherwise, the transistors will be damaged.

In which basis a collector in a transistor is connected in an electrical circuit?

Answer: Collector in a transistor is connected in reverse bias in an electrical circuit. Explanation: Only reverse bias collector can collect majority charge carriers from the base region.

What is the function of base in transistor?

The base is the gate controller device for the larger electrical supply. The collector is the larger electrical supply, and the emitter is the outlet for that supply. By sending varying levels of current from the base, the amount of current flowing through the gate from the collector may be regulated.

What is the purpose of the base drive resistors?

The short answer is that this is a “base resistor” that we use to limit the maximum current that flows through the base of the PNP transistor.

What is the advantage of connecting an emitter resistor in a fixed bias circuit?

Originally Answered: What are the advantages and disadvantages of an emitter resistance feedback biasing? The main, most basic advantage is that emitter resistance reduces much of the circuit gain variability that otherwise is highly dependent on actual transistor current gain.

What is the purpose of connecting through C1 to the transistor base?

The capacitors C1 and C2 isolate the DC voltages in the circuit from the AC signal voltages. A capacitor Ce can be used to bypass the negative feedback for AC frequencies of interest, restoring AC gain but leaving the DC feedback for stability.

How do you connect a transistor?

To connect the transistor as a switch in a circuit, we connect the output of the device that will switch on the transistor to the base of the transistor. The emitter will connect to ground of the circuit. And the collector will connect to the load that the transistor will turn on and the supply voltage of the circuit.