What size bolt takes a 10mm nut?
Table of Contents
What size bolt takes a 10mm nut?
The standard 6mm cap screw has a 10mm head.
What bolt fits a 10mm socket?
So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
Will a 10mm nut fit a 3/8 bolt?
As George says the CG-5 does use the metric 10 x 1.5. That said, they are very close, the 3/8″ bolt is about 0.019″ smaller and the pitch’s are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..
What size bolt is M10?
Metric Hex Bolt Dimensions
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS |
---|---|---|
m10 | 10.00 | 6.17 |
m12 | 12.00 | 4.24 |
m14 | 14.00 | 8.51 |
m16 | 16.00 | 9.68 |
Is M10 the same as 10mm?
If the size is M10 x 25, that would mean that the diameter is 10 mm. The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.
What M size is a 10mm nut?
A 17mm spanner therefore fits a nut 17mm across its flats and this is normally a nut to fit a 10mm diameter bolt (M10).
What size is 10 mm in standard?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
3/16″ | 10mm | 3/8″ |
1/4″ | 11mm | 7/16″ |
5/16″ | 13mm | 1/2″ |
3/8″ | 14mm | 9/16″ |
Whats bigger 10mm or 3 8?
10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch.
What is a 10mm nut?
Nuts have internal machine threads, for use with machine thread bolts and screws.