Which way should a 3 prong outlet be installed?

The electrical code allows outlets to be installed with the ground plug hole facing up, down or sideways. It’s up to you, there is no standard electric outlet orientation. So that means there really is no such thing as upside down outlets.

Why are some 3 prong outlets upside down?

Electricians may position the outlet in an upside-down position so that you can quickly identify the switch-controlled receptacle. Since it stands out visually to most people right away – it provides convenience to the occupants to easily remember which outlet is switch controlled.

Why do some outlets have a sideways prong?

This orientation would reduce the chance of metal (bracelet or necklace) contacting the line and neutral when plugging or unplugging a cord. Screws on each side are connected together by a metal tab that can be removed to isolate the screws.

What is the correct orientation for a electrical outlet?

The outlet should be oriented with the ground pin down because a person grabbing the outlet will have their index finger at the bottom side of the plug and the index finger sticks out further than the thumb. Having the ground down will keep a person’s index finger from touching the live pins.

What orientation should outlets be installed?

The outlet should be oriented with the ground pin up because if the plug comes slightly loose and a metal object were to fall from above, the ground plug, which usually does not carry current, would deflect the object so that it would not hit is live prongs.

Which side of an electrical plug is neutral?

As you can see, the neutral and hot wires are connected to the two vertical prongs at the top of the receptacle (neutral on the left, hot on the right) and the ground wire is connected to the round prong at the bottom of the receptacle.

Can electrical outlets be horizontal?

Yes, you can mount an ordinary wall-type receptacle outlet horizontally with the face up, with two exceptions: 1) Receptacles on a countertop or work surface must be specially rated for that use, per NEC 405.6(B), and are typically pop-up type.