Can I use 4 ohms amplifier for 6 ohms speakers?

Four-ohm speakers are another story, they can place higher demands on 6- or 8-ohm rated receivers and amps’ power reserves, but even those receivers/amps won’t run into trouble with 4-ohm speakers, as long as you’re not playing music or movies at a very loud volume.

Can you mix 4 ohm and 6 ohm speakers?

A: The short answer to your question is that you absolutely can mix and match speakers of varying impedance.

Can you use 8 ohm speakers on a 6 ohm receiver?

It is more a matter of the efficiency of the speakers. Generally speaking, higher rated impedance (more ohms) will provide less sound from the stereo, but they are safe for the stereo.

Can I use a 4-ohm speaker with an 8-ohm amplifier?

If you went the other direction and used a 4 ohm speaker on a 8 ohm amplifier at maximum output you would run the risk of overloading your amplifier and damaging it. Note that impedance isn’t exact. An 8 ohm speaker might have 2 ohms impedance in one frequency range and 20 ohms impedance in another frequency range. Since consumers associate low i

How many ohms is too low for a speaker?

Most speakers are rated at 4, 6 or 8 ohms, and cheaper receivers can sometime have issues driving low-impedance (namely 4 ohm) speakers. ELAC speaker designer Andrew Jones. But that rating is just a baseline. Look at the impedance graph ELAC speaker designer Andrew Jones provided for this article.

Can I put a 250 watt amp on a 4 ohm receiver?

Yes, as long as you don’t go below 4 ohms, that’s what your receiver is rated at. example: 250 watts at 4ohms, match a 250 watt or higher 4 ohm speaker to get the proper load on the amp, and get maximum performance outta the speaker.

Can I use 6 ohm speakers with a 2000 watt amp?

Anyway, yes, you can use the 6 Ohm speakers with your amp. Don’t expect 2000 watts. As the amplifier’s specs tell you, wattage changes with the speaker load. The “wattage” of a speaker is not wattage.