Can you connect 2 power supplies in series?

The answer is: Yes. Any MEAN WELL power supply can be connected in series . They isolated outputs, so that that they can be connected in series to give you a higher voltage.

Can I put 2 power supplies in series?

Series operation of two or more power supplies can be accomplished up to the output isolation rating of any one supply to obtain a higher voltage than that available from a single supply. Never exceed the output isolation voltage rating of any of the supplies.

Can two power supplies be connected in series?

The outputs of two or more power supplies can also be connected in series if the object is to obtain a higher current at the required voltage, since lower voltage supplies usually have higher current ratings. The power supplies could have different voltages allowing greater flexibility of the final output voltage.

How do you tap intermediate voltages in power supplies?

Also, intermediate voltages can be tapped off the connections between power supplies. For example, if four 12V supplies are connected in series to obtain 48V, the intermediate connections can be tapped for 12V, 24V and/or 36V outputs of the same polarity.

What power supply should I use between 12V and common voltage?

Therefore, if (using the same example) 10A will be drawn at each voltage, the supply between Common and 12V needs to be rated at least 40A, but the others need be rated at only 30A, 20A and 10A respectively. Some possible combinations: 48Vdc@18A power supply. 24Vdc@37A power supply.

Is it possible to connect power supplies in parallel?

It is almost always the case that identical supplies are used when connecting them in parallel due to the challenges of efficiently configuring the power supplies. However it is possible to configure supplies in parallel with matching output voltages and non-matching maximum output currents.