Does GM make an inline 6?

The Chevrolet straight-six engine was an inline-6 engine made in three versions between 1929 and 1988 by the Chevrolet Division of General Motors….

What is the best Oldsmobile engine?

The 425 cu in (7.0 L) big-block was the first tall-deck “big block,” produced from 1965 through 1967. It is arguably the best engine Olds made in the muscle car era, although it never made it into a “muscle car”.

When did the straight-6 engine come out?

1964
A “modern era” straight-six engine family was introduced by American Motors (AMC) in 1964. These lighter in weight engines were used in a variety of AMC passenger and Jeep utility vehicles.

What is a 4200 Vortec?

The LL8 (or Vortec 4200), is a straight-6 gasoline engine produced between 2002 and 2009. It has four valves per cylinder, utilizes dual-overhead cams (DOHC) design, and features variable valve timing on the exhaust cam, a first for GM Inline engines.

When did the 292 come out?

GM produced the 292 from 1963 through 1990 only for trucks. During the 1970s, GM equipped its truck-based Chevy Blazer sport utility vehicle with the 292. Early versions generated considerably more horsepower and torque than later 292s.

Is the Oldsmobile 455 a good engine?

There are people that will tell you that the 455ci Oldsmobile Rocket motor makes a better street engine than a race motor. In truth, a stock 455 does have a couple of drawbacks that are detrimental to living life above 4,000 rpm for extended periods. The 455’s Achilles’ heel is a poor oil return system.

How big is a 455 engine?

The Pontiac 455 V-8 was actually a bored out 428-cubic-inch V-8 with a bore and stroke of 4 inches by 4 inches. For the 455, Pontiac expanded the cylinder bore to 4.152 inches and the stroke to 4.21 inches. The 455 powered the Pontiac GTO and Firebird.

Was the Chevy 235 a good engine?

The Chevy 235, inline six-cylinder engine was originally introduced in 1941 for large trucks and is known as one of the truly great Chevy engines due to its power and durability.

What year did Oldsmobile start making straight 6 engines?

Oldsmobile produced a straight-6 automobile engine from 1923 to 1950. It was a conventional side-valve engine of varying capacities and at stages was shared with GMC .

What was the last inline 6 made by Oldsmobile?

The ’49 to ’50 Big Six was to be the last inline six built by Oldsmobile although there were a few models in the late ’60s and early ’70s built using the overhead valve Chevrolet straight-6 engine . The 505 cu in (8.28 L) was used by the Oldsmobile Series 23 between 1910 & 1912. It used a T-head engine configuration and made 60 bhp.

When did Oldsmobile start using side-valve engines?

It was a conventional side-valve engine of varying capacities and at stages was shared with GMC . Although the engines changed from year to year there were basically 5 series of Oldsmobile side-valve 6 cylinder engines over the 27 years of production, 1923 to 1927, 1928 to 1931, 1932 to 1936, 1937 to 1948 and 1949 to 1950.

What kind of engines did Oldsmobile make in the 1930s?

Oldsmobile produced a “multicylinder” straight-8 engine in the 1930s and 1940s. This was the company’s top engine choice from 1932 until the 1949 introduction of the Rocket V8, and was briefly exclusive to the Oldsmobile L-Series . This first version of the Oldsmobile straight-8 was 240.4 cubic inches (3.9 L).