How do I set primary graphics card in BIOS?
Table of Contents
How do I set primary graphics card in BIOS?
HP Laptops
- Restart the computer and hold the Escape key. (
- From the Startup Menu, press the F10 key to enter the BIOS setup utility.
- Click Advanced.
- Select Built-In Device Options.
- Select Graphics, and then select Discrete Graphics.
- Click Save, and, when prompted, click Save changes and exit BIOS.
What is PEG PCI IGD in BIOS?
PEG = PCI Express Graphics, aka your R9 graphics card. IGD = Integrated Graphics Device, aka your iGPU on the CPU.
What is peg display?
PEG Link Mode (PCI Express Graphics Link Mode) is a feature available in the BIOS of some ASUS motherboards, which automatically overclocks the video card by a small amount.
What is PCIe display?
PCIe is short for “peripheral component interconnect express” and it’s primarily used as a standardized interface for motherboard components including graphics, memory, and storage.
How do I enable GPU in ASUS BIOS?
Step 1: Hold or tap the ‘Delete’ key immediately after powering on the system to enter the bios. Step 2: Use the arrow keys to choose ‘Advanced’ menu > System Agent (SA) Configuration\Graphics Configuration > iGPU Multi-Monitor setting > Enable as below. Press the ‘F10’ key to save and exit.
What should I use peg or IGD?
The “Initiate Graphic Adapter” is what graphics device the computer uses to boot. It set to “PEG” it will use the PCIe graphics card. If set to “IGD” if will use your integrated grahics. Since you have no PCIe graphics card it would be best to leave set to “IGD” for now.
What is above 4G decoding in BIOS?
The definition of “Above 4G decoding” is to allow the user to enable or disable memory-mapped I/O for a 64-bit PCIe device to 4GB or greater address space. Please enable this function when using multiple PCIe cards.
What is the difference between IGD and Peg?
How do I change the main Monitor setting in BIOS?
Windows display properties lets you choose your main monitor.. right click desktop > Display Settings > scroll to the bottom… Thanks, but I specifically mentioned that I want to change it for BIOS, not Windows. I know how to change it in Windows and BIOS ignored the setting in Windows.
Is it possible to set the graphics option to PCIe?
Asus said that if a PCIE card was detected I should be able to set that graphics option from Auto to to PCIE, but when I set it to PCIE it defaults back to AUTO mode. It’s still on auto using the on board CPU graphics, and its running fine.
Does BIOS use DP2 as primary monitor?
While BIOS was on I plugged in the “secondary” monitor into DP2 and it stayed that way for that session… then after a reboot it was using DP2 as the primary again. I thought maybe it treats whatever you plug in second as the primary, but nope… same thing. Whatever is plugged into DP2 is the primary it seems.
How do I access the BIOS settings from Windows 10?
If you are having problems accessing the BIOS while starting the PC, you can use this method to access BIOS settings from Windows 10. Click the Start Menu. Click Settings. Click Update and Security. Click Recovery. Under Advanced Startup, click Restart Now. Click Troubleshoot. Click Advanced Options. Click UEFI Firmware Settings. Click Restart.