How do you fix Wii An error has occurred press the eject button?

You put 2-3 drops of the supplied cleaning fluid on the pad, then insert the paddle into the Wii’s disc slot. You wiggle the handle 10-20 times to clean the lens. Press the Eject button to remove the paddle, and you’re done.

How do you fix a frozen Wii?

If a game freezes while playing, usually the power, reset, and eject buttons will not respond. Try unplugging the AC Adapter from the back of the console, then check the air vents to make sure they’re not being blocked. If the error is occurring with multiple games, try cleaning a few of the game discs.

How do you hard reset a Wii?

Basically, you go to the third page of settings of your Wii and then select ‘Format Wii System Memory’. Then press ‘Format’ and TA-DA! Warm note: after you reset it all the data will POOF gone.

Why does my Wii have an error?

The Unable to read the disc error occurs on the Nintendo Wii when the console cannot properly read a disc due to the disc being dirty or damaged, a dirty laser lens, or a laser lens/optical-drive failure. This is by far the most common problem with the original Wii.

How do I get my Wii disc to work?

If a disc won’t play properly, start by checking the disc. A flaw in the disc could prevent the console from reading it. Hold the bottom side of the disc to the light to see any smudges or scratches. If a smudge is the culprit, cleaning the disc often fixes the problem.

What causes the Wii to freeze?

Accessories may cause the system, game, or channel to freeze. Remove any item(s) plugged into the console’s USB port(s) and restart the system. If a game is freezes constantly in the same spot. If the system freezes while attempting to connect to the Wii Shop.

Where is the reset button on Wii?

Locate the « reset » button on the front of the Wii console. Hold it down for a few seconds to reset the device. Wait for the home screen to appear, then hold down the « power » button on the front of the Wii until the power light turns red and the Wii shuts down.

How do you clean a Wii console?

What to do

1. Housing/Exterior. Spray a dry cloth with Windex or Simple Green then wipe the system down.
2. Vents. Use some type of dusting tool, including a dusting attachment for a vacuum.
3. Disc Trays.
4. System Buttons/Levers/Ports.
5. Residue left by vinyl stickers.
6. Lens.