What amp should I charge my 5000mAh NiMH battery?

For the vast majority of LiPos, the Charge Rate is 1C. So, for a 3000mAh battery, we would want to charge at 3A, for a 5000mAh LiPo, we should set the charger at 5A, and for a 4500mAh pack, 4.5A is the correct charge rate. Some batteries can be charged faster than 1C.

What amp should I charge my RC battery?

As a general rule, you should charge your batteries a current of 1C. So, for a 2200 mAh capacity battery, the charge rate should be 2.2 Amps and for a 1700 mAh capacity battery, the charge rate should be 1.7 Amps.

What amp should I charge my 5000mAh battery?

Given that the battery’s capacity is 5000mAh, or 5 Amps, that means the battery can be safely charged at a maximum of 15 Amps! While it’s best to default at a 1C charge rate, always defer to the battery’s labeling itself to determine the maximum safe charge rate.

How long does it take to charge a 3000mah NiMH battery?

A 3000 mAh battery can take up to 45 minutes to charge. It’s not a good idea to use timed charging. If you put it on charge without fully discharging it, you’ll end up with a massive overcharge.

How do you charge a 6 V battery?

Insert your battery into the charger, if the 6-volt battery is nickel or lithium-based. Simply insert the battery into the charger compartment, ensuring you match the “+” and “-” terminal on the battery to the corresponding “+” and “-” terminals on the charger.

What should a 6v battery read?

Look at the digital or meter display on the multimeter or voltmeter. It should read 6 volts if the battery is in good condition and is at least 20 percent charged. If it reads less than 5 volts, recharge the battery.

How long does it take to charge a battery at 5 amps?

A charger with 15 amps, for instance, will take about two hours to fully charge a battery at a 25-percent discharge value. Chargers with only 5 amps, however, will need a full six hours with the same battery.