What is the maximum load for a scaffold?
Table of Contents
What is the maximum load for a scaffold?
875 pounds
Multiply 35 square feet by 25 pounds per square foot and the scaffolding can be loaded with no more than 875 pounds….Rated Load Capacity.
| Rated Load Capacity of Scaffold | Intended Load Should Be |
|---|---|
| Light-Duty “standard” | 25 pounds per square foot (applied uniformly) |
What are the three types of scaffolds aerial?
Three basic types: Supported scaffolds — platforms supported by rigid, load bearing members, such as poles, legs, frames, & outriggers. Suspended scaffolds — platforms suspended by ropes or other non-rigid, overhead support. Aerial Lifts — such as “cherry pickers” or “boom trucks”
What are the weight restrictions for the following scaffolds?
Scaffold working platforms are generally rated as light, medium or heavy duty: Light Duty – up to 225 kg per platform per bay including a concentrated load of 120 kg. Platforms should be at least two traditional scaffold planks wide—approximately 450 mm.
What is OSHA Standard for scaffold?
The standard requires employers to protect each employee on a scaffold more than 10 feet (3.1 m) above a lower level from falling to that lower level. What materials are unacceptable for guardrails?
What is the maximum weight load of a catenary scaffold?
A catenary scaffold is a scaffold consisting of a platform supported by two essentially horizontal and parallel ropes attached to structural members of a building or other structure. Catenary scaffolds have a maximum intended load of 500 pounds, and no more than two employees are permitted on the scaffold at one time.
How many types of scaffolds are there?
There are five main types of scaffolding used worldwide today. These are tube and coupler (fitting) components, prefabricated modular system scaffold components, H-frame / facade modular system scaffolds, timber scaffolds and bamboo scaffolds (particularly in China and India).
What maximum intended load?
“Maximum intended load” is defined in 29 CFR 1926.450 as: [T]he total load of all persons, equipment, tools, materials, transmitted loads, and other loads reasonably anticipated to be applied to a scaffold or scaffold component at any time.
What are 3 types of scaffolding that are normally used in the construction industry?
These include:
- Single scaffolding. Also referred to as or Brick Layers Scaffolding, Single scaffolding is often used in brick masonry works.
- Double Scaffolding.
- Steel scaffolding.
- Cantilever scaffolding.
- Suspended scaffolding.
- Trestle scaffolding.
- RELATED: