Why do we use gearbox in motor?

A gearbox—otherwise known as a gear reducer or speed reducer—is a set of gears that can be added to a motor to drastically decrease speed and/or increase torque. Each gearbox type works in unison with a motor to achieve the desired speed-torque output.

How do you reduce the RPM of an electric motor?

Reducing RPM can be accomplished by using two or more pulleys and belts to transmit and change the speed of rotation. Measure and note the key characteristics of the system.

What happens when we attach a gearbox to a motor?

Increase torque to the load (This is why they’re sometimes referred to as “gear reducers” or “speed reducers.”) In other words, when a gearbox is attached to a motor, the motor must turn faster — by a factor equal to the gear ratio — to deliver the target speed to the load.

What is the motor of RPM?

What Is the RPM of a Motor? RPM is a measurement used to describe a motor’s speed. It stands for revolutions per minute and describes the rate at which the rotor is revolving, which is the number of times the rotor shaft completes a full rotation each minute.

What is RPM of induction motor?

Synchronous and full load speed of amplitude current (AC) induction motors.

Why is Gearbox needed?

The purpose of a gearbox is to increase or reduce speed. As a result, torque output will be the inverse of the speed function. If the enclosed drive is a speed reducer (speed output is less than speed input), the torque output will increase; if the drive increases speed, the torque output will decrease.

What is the benefit of gearbox?

Industrial gearboxes not only provide essential benefits when it comes to creating goods, they also aid in the maintenance of your systems. Using a gearbox to multiply torque, match inertia, and reduce speed helps to cut systems operations by allowing smaller motors and drives to be utilized.

How do gears slow down a motor?

If you want to slow down gradually, take your foot off the accelerator and switch to a lower gear, such as second or third (remembering to rev-match as you downshift). This will slow the car down without you having to touch the brakes.

How do gears reduce speed?

The basic gear changing rule is ‘brakes to slow – gears to go’. As the car increases speed, change up through the gears. When you want to slow down, use the foot brake. You need only change to a lower gear when you need the accelerator again to ‘drive’ the car.