Do check valves work vertically?

Check valve can be installed in horizontal or vertical piping runs, with the flow running upward. Mounting for vertical installations is critical.

Where do you put a check valve on a submersible pump?

In submersible pump applications, the first check valve should be installed directly on the discharge head of the pump or maximum one pipe length (20 feet) above pump.

How do you increase head height on a pump?

The only true way to increase your discharge head is to increade the pump speed or increase the impeller diameter. Buy purchasing a VFD you can greatly increase the control of your flow and head output often while reducing your energy consumption (costs).

Can we use swing check valve vertically?

We hear many people ask, “Can swing check valves be installed vertically?” The simple answer to that question is yes, swing check valves can be installed in both directions.

Should a check valve be installed vertically or horizontally?

When installing a check valve, a horizontal line is always preferred, because it takes gravity out of the equation.

Does a foot valve have to be vertical?

The foot valve shall be installed a maximum of 25 feet vertical distance below the suction pipe of the pump inlet. The foot valve screen shall not be supported at the bottom of tank or well for best operation efficiencies. In addition the foot valve screen shall be a minimum .

Do I need a check valve on a submersible pump?

The check valve will help your water system maintain pressure when the pump shuts off and also prevent backspin, upthrust, and water hammer. It is recommended that at least one check be installed in all submersible well pump installations. Many well pumps have built-in check valves.

What is the vertical lift of the pump?

Suction Lift: This is the vertical distance that the pump can be above the liquid source. Typically, atmospheric pressure limits vertical suction lift of pumps to 25 feet at sea level.

Do all submersible well pumps have check valves?

Check valves are designed to permit water to flow in one direction and are a requirement on all submersible pump installations. Some submersible pumps have check valves built into the unit and are suitable for operation without an external check valve, as long as the pump is not set too deeply.