How can I reduce the voltage of my phone charger?

Every mobile charger has a SMPS (Switched Mode Power Supply) circuit. There are one or two transistor for switching & a tiny and much cheaper high frequency transformer to adjust the output voltage. And since mobile charger does not need too much current, so small components can do this job easily.

Can you use a 5 volt charger to charge a 3.7 volt cell phone battery?

Lithium battery with protection circuit board can be charged with 5V voltage(4.8V to 5.2V can be used). For 3.7V lithium batteries, the charge cut-off voltage is 4.2V and the discharge cut-off voltage is 3.0V. Charging with 5V voltage is easy to cause danger of overcharging.

Can I use phone charger as PSU?

Your USB Smart Phone Charger is actually a Power Supply! As it designed to give a constant output, your Phone actually does all the charge control. This is designed to offer flexibility so your phone can be plugged into any USB port, on your PC for example.

How do you downgrade voltage?

How to Reduce Voltage in Half. To reduce voltage in half, we simply form a voltage divider circuit between 2 resistors of equal value (for example, 2 10KΩ) resistors. To divide voltage in half, all you must do is place any 2 resistors of equal value in series and then place a jumper wire in between the resistors.

How do I reduce battery voltage?

Sometimes, your electronics project might just need a voltage source that’s lower than the battery voltage you have available. When this happens, you can reduce your battery’s voltage to any level you want by building a simple circuit called a voltage divider.

Can you use a 12v charger as a power supply?

many portable car battery chargers are designed to also be a supplemental source of 12VDC power, same with those portable air compressors. As long as the polarities match and the power ratings are within the device parameters, technically, it will power the device.

Can I use a battery charger as a power supply?

There are situations where a battery charger may need to function as a power supply, as well as maintain batteries. A 30 amp charger can supply up to 30 amps continuously if the load demands it. …