How deep should pea gravel be drained?

Work the soil 8 to 12 inches deep — or deeper if necessary — and mix in 2 or 3 inches of pea gravel. Pea gravel that is 3/8 inches in diameter or smaller is an effective soil amendment that keeps soil well-draining throughout the years.

Does pea gravel make a good walkway?

Walkways: Pros Pea gravel used for a walkway provides a softer surface to walk on compared with using a larger type of gravel. Walking on pea gravel barefoot is more bearable than walking on larger rocks which some times have jagged edges that can stab at feet.

How do you stabilize a pea gravel walkway?

The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you’re stabilizing pea gravel with cement, it will hold for a while until it’s eventually damaged by traffic and water exposure.

What size gravel is best for walkway?

For comfortable walking on paths and walkways, the recommended size for decorative gravel or crushed stone is between ¼ inch to 3/8 inch in size.

How do you install a pea gravel walkway?

How do you install pea gravel? Compared to other hardscaping materials, installing pea gravel is relatively easy. Generally, you work the soil about 6 inches deep, remove any weeds, lay down 2 inches of coarsely textured base rock (also called crushed rock), and cover that with a 3-inch-deep layer of pea gravel.

How thick should you lay gravel?

The ideal thickness of each layer is between 4 to 6 inches. The middle layer should also be angular stones about 2” to 3” in diameter such as our #2 Bluestone. Since the material is angular it locks together providing traction and a stable foundation.

How thick should a gravel path be?

Hint: A deep layer of gravel keeps the weeds out That’s why the depth of your gravel path is so important. With at least 2 inches of gravel, seeds are less likely to get enough light to germinate.

How deep should a pebble path be?

Aim to have a depth of about 60mm.

What should I put under pea gravel?

Start with a heavy tamper to compress any soil underneath, add a sturdy base layer of either crushed rock or sand, layer on about 3 inches of pea gravel, and then tamp down again to make sure everything is compact. A sturdy base is especially important for gravel driveways.

How deep should I lay gravel?

Decorative aggregates should be laid at a depth of 50mm. This ensures proper coverage without revealing the surface below. Laying the gravel too deep will mean you sink into the surface and it becomes difficult to walk across.

How do you install pea gravel walkway?